Wire EDM, often referred to as WEDM, is a way of machining which is executed by using a thin wire that can easily cut in any X,Y,U,V direction. EDM is an acronym for “electric discharge machining.” This method of machining effectively cuts all types of material that conduct electrical current, whether it is a hard or soft material. The thing that makes this significant is the fact that wire EDM will cut without making contact, and results in a burr-free finish. The wire that is used is rather fine, thereby making it possible for very small slots or small radius cuts on corners.

The wire in no way touches the piece being cut, and because of this fact, there won’t be any cutting forces. Therefore it is easy to cut exceptionally thin stock and make extremely precise cuts without causing damage. Wire EDM has been around the business for roughly half a century now in various forms.

For Your Southeast Wisconsin Wire EDM Needs

CAM Tech, Inc. started in 1996 to serve the wire EDM needs for southeast Wisconsin. At the time we had a single EDM wire machine and a dedication to providing the best quality and service possible. Now we are a growing facility with 12 high-speed wire EDMs, 2 EDM micro hole drilling stations, and 6,000 newly added square feet of shop space for expansion.

We continue to work very closely with our customers, providing quick turnaround while maintaining a high quality standards. However, we are now large enough to tackle large production and contract jobs. We take pride in aiding our customers through every phase of the project – from prototyping to production runs. We will work with you and your schedule, and we have the ability to run 24/7.

If you are looking for wire EDM in southeast Wisconsin, contact us for more information.